Freezer Compressor Not Working? Fix It Yourself!

Freezer Compressor Not Working? Fix It Yourself!
Home » Tips » Freezer Compressor Not Working? Fix It Yourself!

Is your freezer turning into a warm, unwelcome storage space? A freezer compressor not working properly could be the culprit behind your frosty food woes. This vital component is the heart of your freezer, working tirelessly to maintain the icy temperatures that preserve your precious perishables. But when it grinds to a halt, it can lead to a cascade of problems, from soaring energy bills to spoiled groceries.

Fear not! This comprehensive guide is your roadmap to diagnosing and potentially resolving your freezer compressor not working. We’ll delve into the common culprits behind a non-working compressor, provide step-by-step troubleshooting tips, and empower you to take control of your freezer’s health. So, let’s get started and restore your freezer to its frosty best!

Signs Your Freezer Compressor is Not Working As It Should

Unusual Noises

Strange sounds such as knocking, clicking, or buzzing emanating from your freezer are clear indicators that the compressor might be malfunctioning. These noises often result from internal component failures or wear and tear.

Inconsistent Temperature

A faulty compressor can cause erratic temperature fluctuations within the freezer. If you notice that your freezer is not maintaining a consistent temperature, it’s crucial to inspect the compressor for issues.

Excessive Frost Build-Up

While some frost accumulation is normal, an excessive build-up can signify that the compressor is not functioning efficiently. This can lead to poor cooling performance and potential damage to stored items.

Diagnosing Freezer Compressor Problems

Visual Inspection

Begin by unplugging the freezer and conducting a visual inspection of the compressor and its surrounding components. Look for visible signs of damage, such as oil leaks, corrosion, or loose connections.

Testing Compressor Functionality

Step 1: Check the Start Relay

  • The start relay is a critical component that helps the compressor start. Remove the relay from the compressor and test it using a multimeter. If the relay is faulty, it will need to be replaced.

Step 2: Measure the Compressor Windings

  • Use a multimeter to measure the resistance of the compressor windings. Set the multimeter to the ohms setting and place the probes on the compressor terminals. Compare the readings to the manufacturer’s specifications. Any significant deviation indicates a problem with the compressor windings.

Step 3: Test for Ground Fault

  • Check for a ground fault by placing one probe on a compressor terminal and the other on the compressor casing. A reading other than infinity indicates a ground fault, necessitating compressor replacement.

Solutions for Common Compressor Problems

Replacing a Faulty Start Relay

A malfunctioning start relay can prevent the compressor from starting. Replace the relay by following these steps:

  1. Unplug the Freezer: Ensure safety by disconnecting the power supply.
  2. Locate the Relay: Find the start relay on the compressor.
  3. Remove the Relay: Gently disconnect the relay from the compressor.
  4. Install the New Relay: Attach the new relay in place of the old one.
  5. Power On the Freezer: Plug in the freezer and observe if the compressor starts.

Cleaning the Condenser Coils

Dirty condenser coils can lead to compressor overheating and inefficient operation. Clean the coils regularly:

  1. Unplug the Freezer: Safety first—disconnect the power supply.
  2. Access the Coils: Locate the condenser coils, usually at the back or underneath the freezer.
  3. Clean the Coils: Use a coil cleaning brush or a vacuum to remove dust and debris.
  4. Reassemble and Test: Plug in the freezer and check its cooling performance

Addressing Refrigerant Issues

Low refrigerant levels can strain the compressor and affect cooling efficiency. If you suspect a refrigerant leak:

  1. Identify the Leak: Look for oily residue around the compressor and refrigerant lines.
  2. Seal the Leak: Use a refrigerant leak sealant to close small leaks.
  3. Recharge Refrigerant: Have a professional technician recharge the refrigerant to the required level.

Preventative Maintenance for Freezer Compressors

Regular Cleaning

  • Keep the condenser coils and compressor area clean to ensure efficient heat dissipation. Clean these components every six months to prevent dust build-up.

Monitor Temperature Settings

  • Set the freezer temperature according to the manufacturer’s recommendations. Avoid frequent adjustments, as this can strain the compressor.

Professional Inspections

  • Schedule annual inspections by a professional technician to identify and address potential issues before they escalate.

Conclusion

Understanding and addressing the freezer compressor not working promptly can prevent costly repairs and ensure the longevity of your appliance. Regular maintenance, combined with professional interventions from Platinum Sub Zero Repair, will keep your freezer running efficiently and reliably. By following the steps outlined in this guide, you can diagnose and solve common compressor issues, ensuring optimal performance and energy efficiency.

FAQs

  • Why does a freezer compressor stop working?

Common causes include wear and tear, electrical issues, refrigerant leaks, or overheating.

  • How do I know if my freezer compressor is bad?

Signs include no cooling, unusual noises, frequent cycling, or a warm compressor.

  • How to reset the freezer compressor?

Unplug the freezer, wait 5 minutes, then plug it back in. Check if it restarts. If not, the issue might be more complex.

Don’t miss out—subscribe for the latest updates!

Contact Us

Book a service